ZDNET Details 3 Key Steps for 3M Command Strips to Prevent Wall Damage
Updated
Updated · ZDNet · Jul 10
ZDNET Details 3 Key Steps for 3M Command Strips to Prevent Wall Damage
3 articles · Updated · ZDNet · Jul 10
Summary
ZDNET says most Command strip failures come from misuse, highlighting three basics: use them on smooth clean surfaces, pick the correct product, and remove them by pulling the tab slowly.
3M’s strips are meant for painted walls, sealed wood, tile, glass, mirrors, and metal—not wallpaper or textured, dusty surfaces—and regular indoor versions generally work from 50°F to 105°F.
Command products range from 0.5 pound to 20 pounds, with bathroom jobs needing water-resistant versions; ZDNET advises wiping surfaces with rubbing alcohol, not soap, acetone, or household cleaners.
Users should press the strip for 30 seconds, wait 24 hours before loading it, and remove it by stretching the tab downward parallel to the wall for at least 12 inches.
For heavier items such as mirrors or large frames, ZDNET points readers to 3M CLAW hooks, which can hold up to 65 pounds but do leave marks.